HeiGuno 8″ / 200mm 110V Metal Shell Impulse Manual Hand Sealer Heat Sealing Machine Spare Teflon & Sealing Elements (White Aluminum 12″) Review

HeiGuno 8

    This fits your .
  • Make sure this fits by entering your model number.
  • 1.Iron quality, not easy to dump, the use of stability, compared with the old models, there is a great improvement in quality, basically solve all the problems of the old models,with a certain quality superiority.
  • 2.Double paint, finish luster, rust effect is good, the appearance of fine Transformer internal use of pure copper coil, wire thick, compared to other products, aluminum wire, copper long life, reduce heat and work loss
  • 3.Silicon steel sheet with high silicon content of the material, increase the permeability, effectively reduce the core loss and magnetic aging, silicon steel surface rust coating, increase the service life and stability
  • 4.Can be used to seal kel-F, Mylar, polyflex, P.V.A, polyethylene, polyurethane, polyvinylchloride, polypropylene, pliofilm, tivac, saranimpluse
  • 5.What You Get: 8″ impulse sealer, 1 extra heat seal strip, welcome guide,Feel free to contact us with any questions.

Size:White Aluminum 12″

SPECIFICATIONS:
1.Adjustable timer allows perfect seals for a wide variety of bags thicknesses, can be used with bags up to 6 mils thick
2.Impulse power: 300W voltage: 110 V
3.Seal length: 8 inches

NOTE:
1. Level 3 is enough for most applications.
2. The red light is not predictable when plug into the power. It is only predictable when keep the handle pressed down on bottom. This is a protection for sealer or it will burn out after several uses.
3. When seal is done, the red light will go off. Keep the handle pressed down for a few seconds to get optimal results.
4. Keep the sealer’s surface clean to avoid the oxidation of the residue or it will reduce the life of the heating wire and high temperature cloth!
5. Do not use wet cloth to clean the surface
6. if the gasket below the heating wire is damaged, it will cause a short circuit and damage the heating strip. Therefore,please check the condition of the gasket each time you change the heating strip. If it is damaged,please replace a new one
7. please choose the same specification when changing the heating wire

PACKAGE CONTENTS:
1x impulse heat sealer
1x extra sealing elements
1x instruction manual

Additional Products

Be the first to comment

Leave a Reply

Your email address will not be published.


*